URL could not be retrieved
by Fernando Iglesias Pulido
Hi,
I'm trying access at Fedora PKI main page and download the Certificate
system source code but always get the same error: url could not be
retreived. Anybody could suggest me an URL to download that source code?
Regards
______________________
Este mensaje, y en su caso, cualquier fichero anexo al mismo,
puede contener informacion clasificada por su emisor como confidencial
en el marco de su Sistema de Gestion de Seguridad de la
Informacion siendo para uso exclusivo del destinatario, quedando
prohibida su divulgacion copia o distribucion a terceros sin la
autorizacion expresa del remitente. Si Vd. ha recibido este mensaje
erroneamente, se ruega lo notifique al remitente y proceda a su borrado.
Gracias por su colaboracion.
______________________
This message including any attachments may contain confidential
information, according to our Information Security Management System,
and intended solely for a specific individual to whom they are addressed.
Any unauthorised copy, disclosure or distribution of this message
is strictly forbidden. If you have received this transmission in error,
please notify the sender immediately and delete it.
______________________
15 years, 5 months
Re: [Pki-devel] [Fwd: Re: [Dogtag 1.0]]
by Fabi Jubi
Hi Arshad,
I got error like this if the CA and the RA were in separetad firewall
zone. The problem was that in the communication: the CA got the firewall
address as source address and not the RA's
address. The soulution: we had to edit the hosts file like this:
IP address of firewall RAhostname
After the installation we could correct the hosts file and everythig worked
fine.
So, maybe check the name resolution.
Bye:
Peter
2008/3/28, Christina Fu <cfu(a)redhat.com>:
>
>
>
>
> ---------- Továbított levél ----------
> From: Christina Fu <cfu(a)redhat.com>
> To: pki-users(a)redhat.com
> Date: Fri, 28 Mar 2008 07:58:39 -0700
> Subject: Re: [Dogtag 1.0]
> Hi Arshad,
>
> Welcome to Dogtag!!
> The message "CA response: Authorization Error. Please also check
> previous related panels" is an indication that there is a problem
> between RA to CA communication.
> There are two places to trouble shoot.
> One is in the RA debug log, where, from the bottom of the log, you want
> to look for string "NamePanel: response content=" and see what the
> content value is. It should contain a non-zero return value from CA. A
> zero response means success.
> The other place is the CA debug log, where you might want to search for
> key word "profileSubmit" starting from the bottom of the log, and then
> scroll down slowly to find any error message relating to the
> authentication error.
>
> I believe the cookie has a timeout period, so if you waited too long in
> the middle of the installation of the RA, you would get an
> authentication error.
>
> Hope this helps. Let me know how it goes.
>
> Christina
> >
> >
> > -------- Original Message --------
> > Subject: Dogtag 1.0
> > Date: Wed, 19 Mar 2008 18:44:07 -0700
> > From: Arshad Noor <arshad.noor(a)strongauth.com>
> > Organization: StrongAuth, Inc.
> > To: pki-users(a)redhat.com, pki-devel(a)redhat.com
> >
> > Congratulations to the Dogtag team for finally open-sourcing
> > the product. Its a welcome addition to the open-source
> > community. Its been a long time coming, but better late than
> > never. :-)
> >
> > Question: In configuring the RA (after successfully setting
> > up the CA on 2.6.24.3-34.fc8 #1 SMP x86_64) there is an error
> > when trying to proceed past the "Subject Names" panel:
> >
> > "CA response: Authorization Error. Please also check previous related
> > panels."
> >
> > Any explanation of what went wrong? There doesn't appear to be
> > any errors in the error_log or debug files, but there is a small
> > ra-debug.log which shows an "Authentication Error".
> >
> > The only authentication credential I recall the wizard prompted
> > for was for the CA administrator ID (which was correct since the
> > cookie got established and I was able to proceed this far).
> >
> > TIA.
> >
> > Arshad Noor
> > StrongAuth, Inc.
> >
>
>
> _______________________________________________
> Pki-devel mailing list
> Pki-devel(a)redhat.com
> https://www.redhat.com/mailman/listinfo/pki-devel
>
>
>
15 years, 6 months
Re: [Dogtag 1.0]
by Christina Fu
Hi Arshad,
Welcome to Dogtag!!
The message "CA response: Authorization Error. Please also check
previous related panels" is an indication that there is a problem
between RA to CA communication.
There are two places to trouble shoot.
One is in the RA debug log, where, from the bottom of the log, you want
to look for string "NamePanel: response content=" and see what the
content value is. It should contain a non-zero return value from CA. A
zero response means success.
The other place is the CA debug log, where you might want to search for
key word "profileSubmit" starting from the bottom of the log, and then
scroll down slowly to find any error message relating to the
authentication error.
I believe the cookie has a timeout period, so if you waited too long in
the middle of the installation of the RA, you would get an
authentication error.
Hope this helps. Let me know how it goes.
Christina
>
>
> -------- Original Message --------
> Subject: Dogtag 1.0
> Date: Wed, 19 Mar 2008 18:44:07 -0700
> From: Arshad Noor <arshad.noor(a)strongauth.com>
> Organization: StrongAuth, Inc.
> To: pki-users(a)redhat.com, pki-devel(a)redhat.com
>
> Congratulations to the Dogtag team for finally open-sourcing
> the product. Its a welcome addition to the open-source
> community. Its been a long time coming, but better late than
> never. :-)
>
> Question: In configuring the RA (after successfully setting
> up the CA on 2.6.24.3-34.fc8 #1 SMP x86_64) there is an error
> when trying to proceed past the "Subject Names" panel:
>
> "CA response: Authorization Error. Please also check previous related
> panels."
>
> Any explanation of what went wrong? There doesn't appear to be
> any errors in the error_log or debug files, but there is a small
> ra-debug.log which shows an "Authentication Error".
>
> The only authentication credential I recall the wizard prompted
> for was for the CA administrator ID (which was correct since the
> cookie got established and I was able to proceed this far).
>
> TIA.
>
> Arshad Noor
> StrongAuth, Inc.
>
15 years, 6 months
Dogtag 1.0
by Arshad Noor
Congratulations to the Dogtag team for finally open-sourcing
the product. Its a welcome addition to the open-source
community. Its been a long time coming, but better late than
never. :-)
Question: In configuring the RA (after successfully setting
up the CA on 2.6.24.3-34.fc8 #1 SMP x86_64) there is an error
when trying to proceed past the "Subject Names" panel:
"CA response: Authorization Error. Please also check previous related
panels."
Any explanation of what went wrong? There doesn't appear to be
any errors in the error_log or debug files, but there is a small
ra-debug.log which shows an "Authentication Error".
The only authentication credential I recall the wizard prompted
for was for the CA administrator ID (which was correct since the
cookie got established and I was able to proceed this far).
TIA.
Arshad Noor
StrongAuth, Inc.
15 years, 6 months
