2:48 p.m.
I've had to setup an older 8.x environment (CA, TKS, and TPS) for testing.
I am getting an error when formatting a card. Things seem to progress nicely, but at the
end the ESC displays an error and the TPS logs have the following errors:
RA::tdb_update - searching for tokendb entry: xxxxxxxRA:tdb_update - failed to add tokendb
entryRA_Processor::Format - Failed to update the token databaseRA_Processor::Format -
returning status 41
The system has access to and authenticates fine to the LDAP Server.
Any ideas why the system can't add the
token? -----------------------------------------------------------Dennis
Gnatowski dgnatowski(a)yahoo.com
3:27 p.m.
Hello:
It looks like from below you are getting through the hard part, which is formatting the
token.
Then for some reason the update to the tokendb is failing.
Access to the tokendb should be set up automatically when running the installation
wizard.
It might help to look at your CS.cfg and an entry like this:
tokendb.hostport=your.host.com:389
Make sure that the DS is running and available on that port.
----- Original Message -----
From: "Dennis Gnatowski" <dgnatowski(a)yahoo.com>
To: pki-users(a)redhat.com
Sent: Wednesday, July 12, 2017 12:48:23 PM
Subject: [Pki-users] failed to update tokendb entry
I've had to setup an older 8.x environment (CA, TKS, and TPS) for testing.
I am getting an error when formatting a card. Things seem to progress nicely,
but at the end the ESC displays an error and the TPS logs have the following
errors:
RA::tdb_update - searching for tokendb entry: xxxxxxx
RA:tdb_update - failed to add tokendb entry
RA_Processor::Format - Failed to update the token database
RA_Processor::Format - returning status 41
The system has access to and authenticates fine to the LDAP Server.
Any ideas why the system can't add the token?
-----------------------------------------------------------
Dennis Gnatowski
dgnatowski(a)yahoo.com
_______________________________________________
Pki-users mailing list
Pki-users(a)redhat.com
https://www.redhat.com/mailman/listinfo/pki-users
3:59 p.m.
Yes, that is there and correct in the TPS's CS.cfg file.
That's what's so puzzling.
-----------------------------------------------------------Dennis
Gnatowski dgnatowski(a)yahoo.com
From: John Magne <jmagne(a)redhat.com>
To: Dennis Gnatowski <dgnatowski(a)yahoo.com>
Cc: pki-users(a)redhat.com
Sent: Wednesday, July 12, 2017 4:27 PM
Subject: Re: [Pki-users] failed to update tokendb entry
Hello:
It looks like from below you are getting through the hard part, which is formatting the
token.
Then for some reason the update to the tokendb is failing.
Access to the tokendb should be set up automatically when running the installation
wizard.
It might help to look at your CS.cfg and an entry like this:
tokendb.hostport=your.host.com:389
Make sure that the DS is running and available on that port.
----- Original Message -----
From: "Dennis Gnatowski" <dgnatowski(a)yahoo.com>
To: pki-users(a)redhat.com
Sent: Wednesday, July 12, 2017 12:48:23 PM
Subject: [Pki-users] failed to update tokendb entry
I've had to setup an older 8.x environment (CA, TKS, and TPS) for testing.
I am getting an error when formatting a card. Things seem to progress nicely,
but at the end the ESC displays an error and the TPS logs have the following
errors:
RA::tdb_update - searching for tokendb entry: xxxxxxx
RA:tdb_update - failed to add tokendb entry
RA_Processor::Format - Failed to update the token database
RA_Processor::Format - returning status 41
The system has access to and authenticates fine to the LDAP Server.
Any ideas why the system can't add the token?
-----------------------------------------------------------
Dennis Gnatowski
dgnatowski(a)yahoo.com
_______________________________________________
Pki-users mailing list
Pki-users(a)redhat.com
https://www.redhat.com/mailman/listinfo/pki-users
2502
days inactive
2502
days old
2 comments
2 participants
participants (2)
-
Dennis Gnatowski -
John Magne