5:16 p.m.
On 9/19/2013 1:13 PM, Ade Lee wrote:
This patch adds interactive install for the tomcat tps.
Please review,
Ade
Some issues:
1. The following line doesn't assign the result to the status variable:
parser.get_server_status('tks', 'pki_tks_uri')
2. My TPS installation failed to create the database. I'm still
investigating the problem.
There are some minor visual issues, please see if they make sense. This
is the current pkispawn output:
TPS Parameters:
CA URI [https://localhost:8443]:
TKS URI [https://localhost:8443]:
Enable Server Side Key Generation (Yes/No)? y
DRM URI [https://localhost:8443]:
Authentication Database Hostname [localhost]:
Authentication Database Port [389]:
Authentication Database Base DN: dc=example,dc=com
Begin installation (Yes/No/Quit)?
3. Instead of "TPS Parameters" we can use "Token Processing Service"
or
"External Servers".
4. The "Authentication Database" could also be put into a separate
section to avoid repetitions.
5. To be consistent the questions shouldn't use capital letters unless
it's the beginning of the sentence, in abbreviations or names. So in
this case the questions should say:
Enable server-side key generation
Authentication database hostname
Authentication database port
Authentication database base DN
6. The "Enable server-side key generation" question probably should have
a default value of "N". This way someone trying out TPS can continue
with minimal configuration.
7. There has been an unresolved issue about the usage of KRA vs DRM.
However, since pkispawn has consistently use KRA in its output, we
should use that instead of DRM.
8. It's probably better to use "URL" or "location" instead of
"URI"
since the value has to point to an actual location, not just a name. We
probably have been using URI incorrectly in the code.
9. There should be a single blank line between the last question and
"Begin installation" to signify the end of questions.
--
Endi S. Dewata
8:11 a.m.
Ok, made the suggested changes. New patch attached.
The current output now looks like this:
Subsystem (CA/KRA/OCSP/TKS/TPS) [CA]: TPS
Tomcat:
Instance [pki-tomcat]:
HTTP port [8080]:
Secure HTTP port [8443]:
AJP port [8009]:
Management port [8005]:
Administrator:
Username [tpsadmin]:
Password:
Verify password:
Import certificate (Yes/No) [Y]?
Import certificate from [/root/.dogtag/pki-tomcat/ca_admin.cert]:
Export certificate to [/root/.dogtag/pki-tomcat/tps_admin.cert]:
Directory Server:
Hostname [vm-132.idm.lab.bos.redhat.com]:
Port [389]: 55389
Bind DN [cn=Directory Manager]:
Password:
Base DN [o=pki-tomcat-TPS]:
Base DN already exists. Overwrite (Yes/No/Quit)? Yes
Security Domain:
Hostname [vm-132.idm.lab.bos.redhat.com]:
Secure HTTP port [8443]:
Name: domain 0917 take 2
Username [caadmin]:
Password:
External Servers:
CA URL [https://vm-132.idm.lab.bos.redhat.com:8443]:
TKS URL [https://vm-132.idm.lab.bos.redhat.com:8443]:
Enable server side key generation (Yes/No) [No]? Yes
KRA URL [https://vm-132.idm.lab.bos.redhat.com:8443]:
Authentication Database:
Hostname [vm-132.idm.lab.bos.redhat.com]:
Port [389]:
Base DN: dc=redhat,dc=com
Begin installation (Yes/No/Quit)?
All good?
Ade
On Thu, 2013-09-19 at 17:16 -0500, Endi Sukma Dewata wrote:
On 9/19/2013 1:13 PM, Ade Lee wrote:
> This patch adds interactive install for the tomcat tps.
>
> Please review,
> Ade
Some issues:
1. The following line doesn't assign the result to the status variable:
parser.get_server_status('tks', 'pki_tks_uri')
2. My TPS installation failed to create the database. I'm still
investigating the problem.
There are some minor visual issues, please see if they make sense. This
is the current pkispawn output:
TPS Parameters:
CA URI [https://localhost:8443]:
TKS URI [https://localhost:8443]:
Enable Server Side Key Generation (Yes/No)? y
DRM URI [https://localhost:8443]:
Authentication Database Hostname [localhost]:
Authentication Database Port [389]:
Authentication Database Base DN: dc=example,dc=com
Begin installation (Yes/No/Quit)?
3. Instead of "TPS Parameters" we can use "Token Processing Service"
or
"External Servers".
4. The "Authentication Database" could also be put into a separate
section to avoid repetitions.
5. To be consistent the questions shouldn't use capital letters unless
it's the beginning of the sentence, in abbreviations or names. So in
this case the questions should say:
Enable server-side key generation
Authentication database hostname
Authentication database port
Authentication database base DN
6. The "Enable server-side key generation" question probably should have
a default value of "N". This way someone trying out TPS can continue
with minimal configuration.
7. There has been an unresolved issue about the usage of KRA vs DRM.
However, since pkispawn has consistently use KRA in its output, we
should use that instead of DRM.
8. It's probably better to use "URL" or "location" instead of
"URI"
since the value has to point to an actual location, not just a name. We
probably have been using URI incorrectly in the code.
9. There should be a single blank line between the last question and
"Begin installation" to signify the end of questions.
11:10 a.m.
acked by Endi. pushed to master.
On Fri, 2013-09-20 at 09:11 -0400, Ade Lee wrote:
Ok, made the suggested changes. New patch attached.
The current output now looks like this:
Subsystem (CA/KRA/OCSP/TKS/TPS) [CA]: TPS
Tomcat:
Instance [pki-tomcat]:
HTTP port [8080]:
Secure HTTP port [8443]:
AJP port [8009]:
Management port [8005]:
Administrator:
Username [tpsadmin]:
Password:
Verify password:
Import certificate (Yes/No) [Y]?
Import certificate from [/root/.dogtag/pki-tomcat/ca_admin.cert]:
Export certificate to [/root/.dogtag/pki-tomcat/tps_admin.cert]:
Directory Server:
Hostname [vm-132.idm.lab.bos.redhat.com]:
Port [389]: 55389
Bind DN [cn=Directory Manager]:
Password:
Base DN [o=pki-tomcat-TPS]:
Base DN already exists. Overwrite (Yes/No/Quit)? Yes
Security Domain:
Hostname [vm-132.idm.lab.bos.redhat.com]:
Secure HTTP port [8443]:
Name: domain 0917 take 2
Username [caadmin]:
Password:
External Servers:
CA URL [https://vm-132.idm.lab.bos.redhat.com:8443]:
TKS URL [https://vm-132.idm.lab.bos.redhat.com:8443]:
Enable server side key generation (Yes/No) [No]? Yes
KRA URL [https://vm-132.idm.lab.bos.redhat.com:8443]:
Authentication Database:
Hostname [vm-132.idm.lab.bos.redhat.com]:
Port [389]:
Base DN: dc=redhat,dc=com
Begin installation (Yes/No/Quit)?
All good?
Ade
On Thu, 2013-09-19 at 17:16 -0500, Endi Sukma Dewata wrote:
> On 9/19/2013 1:13 PM, Ade Lee wrote:
> > This patch adds interactive install for the tomcat tps.
> >
> > Please review,
> > Ade
>
> Some issues:
>
> 1. The following line doesn't assign the result to the status variable:
>
> parser.get_server_status('tks', 'pki_tks_uri')
>
> 2. My TPS installation failed to create the database. I'm still
> investigating the problem.
>
>
> There are some minor visual issues, please see if they make sense. This
> is the current pkispawn output:
>
> TPS Parameters:
> CA URI [https://localhost:8443]:
> TKS URI [https://localhost:8443]:
> Enable Server Side Key Generation (Yes/No)? y
> DRM URI [https://localhost:8443]:
> Authentication Database Hostname [localhost]:
> Authentication Database Port [389]:
> Authentication Database Base DN: dc=example,dc=com
> Begin installation (Yes/No/Quit)?
>
> 3. Instead of "TPS Parameters" we can use "Token Processing
Service" or
> "External Servers".
>
> 4. The "Authentication Database" could also be put into a separate
> section to avoid repetitions.
>
> 5. To be consistent the questions shouldn't use capital letters unless
> it's the beginning of the sentence, in abbreviations or names. So in
> this case the questions should say:
>
> Enable server-side key generation
> Authentication database hostname
> Authentication database port
> Authentication database base DN
>
> 6. The "Enable server-side key generation" question probably should have
> a default value of "N". This way someone trying out TPS can continue
> with minimal configuration.
>
> 7. There has been an unresolved issue about the usage of KRA vs DRM.
> However, since pkispawn has consistently use KRA in its output, we
> should use that instead of DRM.
>
> 8. It's probably better to use "URL" or "location" instead
of "URI"
> since the value has to point to an actual location, not just a name. We
> probably have been using URI incorrectly in the code.
>
> 9. There should be a single blank line between the last question and
> "Begin installation" to signify the end of questions.
>
_______________________________________________
Pki-devel mailing list
Pki-devel(a)redhat.com
https://www.redhat.com/mailman/listinfo/pki-devel
3878
days inactive
3879
days old
3 comments
2 participants
participants (2)
-
Ade Lee -
Endi Sukma Dewata