Re: [Pki-users] Cisco Router and RA SCEP & PIN

Looking for some help: I've been beating my head over this for a few days with no resolve: 1. Using DCS version 1.3 2. In RA SSL End User Services, perform a SCEP enrollment using following information: a. Client IP: a user id b. Site ID: The IP address of the router c. Email: My email address 3. In RA Agent Services, approve the request and note the PIN that is assigned. 4. In router, generate RSA key: crypto key gen rsa Set to 1024 modulus 5. In router, create the crypto ca trustpoint as follows: crypto ca trustpoint CA enrollment mode ra enrollment url http://ra.test.com:12888/ee/scep/pkiclient.cgi crl optional 6. In router, obtain CA certificate (with no problem) crypto ca authenticate CA Certificate has the following attributes: Fingerprint MD5: blah blah Fingerprint SHA1: blah blah %Do you accept this certificate? [yes/no]: yes Trustpoint CA certificate accepted. Here's where it all blows up: 7. Try to obtain certificate: crypto ca enroll CA % % Start certificate enrollment . % Create a challenge password. You will need to verbally provide this Password to the CA Administrator in order to revoke your certificate. For security reasons you password will not be saved in the configuration. Please make a note of it. Password: {I've tried the PIN and just any 'ol password} Re-enter password: % The subject name in the certificate will include: TEST_HOST.cert-test.net % Include the router serial number in the subject name? [yes/no]: no {tried both} % Include the IP address in the subject name? [no]: no {tried both} Request certificate from CA? [yes/no] yes % Certificate request sent to Certificate Authority % The 'show crypto ca certificate CA verbose' command will show the fingerprint CRYPTO_PKI: Certificate Request Fingerprint MD5: blah blah CRYPTO_PKI: Certificate Request Fingerprint SHA1: blah blah %PKI-6-CERTFAIL: Certificate enrollment failed. 8. I have turned on debugging and found that everytime it failed, I was being told at the end of the debugging that I was being redirected with a '302 Moved' to /ee/scep/installer.cgi 9. So I went in and edited the following file: vi ./var/lib/pki-ra/docroot/ee/scep/pkiclient.cgi and commented out the following 4 lines in the file: # check PIN if (1) { my $pin_store = PKI::Base::PinStore->new(); $pin_store->open($cfg); my $pinref = $pin_store->read_pin($key); if (defined($pinref) && $pinref->{'pin'} eq $pin) { $pin_store->delete($key); } else { # $pin_store->close(); # # XXX - return SCEP error # print $q->redirect("/ee/scep/installer.cgi"); # return; } $pin_store->close(); } 10. I ran thru the whole enrollment process again - and bang: It works So I know that the issue is that it can't determine the PIN that was assigned during the RA enrollment process. Does anyone know how I can resolve this so that PIN authentication works? Thanks, Charles Jennings Network Security Engineer | Network Engineering EarthLink Business E: charles.jennings(a)corp.earthlink.com <mailto:charles.jennings@corp.earthlink.com> O: 256-241-4223 | M: 256-689-9741 | F: 256-241-4294 1801 Hillyer Robinson Parkway | Anniston, AL | 36207 Deltacom is now EarthLink Business "There is one safeguard known generally to the wise, which is an advantage and security to all, but especially to democracies as against despots. What is it? Distrust." Demosthenes (c 384-322 B.C.), Greek orator. Second Philippic, sct. 24 (344 B.C.) _______________________________________________ Pki-users mailing list Pki-users(a)redhat.com https://www.redhat.com/mailman/listinfo/pki-users