It shows up as a coolkey supported card. I will look at the logs and see if I can find anything. On Tue, Jun 11, 2013 at 12:52 PM, John Magne <jmagne@redhat.com> wrote:
First of all, that doesn't sound like it's one of the supported smart cards. That is no sure bet that it won't work though.
Second, a look at the tps-debug.log for TPS would help.
From: "Brian Henson" <marine64@gmail.com> To: "Andrew Wnuk" <awnuk@redhat.com> Cc: pki-users@redhat.com Sent: Monday, June 10, 2013 7:10:04 PM Subject: Re: [Pki-users] (Fedora 17) PKI-RA fails to start after install
Only error I am working with now is my test smart card (expresso pro 64k -fips) shows error 28 when I try to format it using the smart card manager. Anyone know how to fix that?
On Mon, Jun 10, 2013 at 9:55 PM, Brian Henson < marine64@gmail.com > wrote:
Perfect. Changed the two files and it installed perfectly. Thank you for your help.
On Mon, Jun 10, 2013 at 8:39 PM, Andrew Wnuk < awnuk@redhat.com > wrote:
On 06/10/2013 12:56 PM, Brian Henson wrote:
I have SELinux completely disabled. SHould I skip the semanage part? Yes, check the earlier comments.
On Mon, Jun 10, 2013 at 12:26 PM, Andrew Wnuk < awnuk@redhat.com > wrote:
Hi Brian,
it looks like you may have similar issue to https://bugzilla.redhat.com/show_bug.cgi?id=971031 Could you try solution provided in 971031?
Thank you, Andrew
On 06/09/2013 06:48 PM, Brian Henson wrote:
Log file
On Sun, Jun 9, 2013 at 9:47 PM, Brian Henson < marine64@gmail.com > wrote:
Changed the syntax checking now i get this when starting
Jun 09 21:43:11 server pkicontrol[1816]: ln: failed to create symbolic
`pkiuser/logs': No such file or directory Jun 09 21:43:11 server pkicontrol[1816]: ERROR: Failed to create 'pkiuser/logs' -> '/var/log/pki-tps'! Jun 09 21:43:11 server pkicontrol[1816]: WARNING: Symbolic link 'pkiuser/run' does NOT exist! Jun 09 21:43:11 server pkicontrol[1816]: INFO: Attempting to create 'pkiuser/run' -> '/var/run/pki/tps' . . . Jun 09 21:43:11 server pkicontrol[1816]: ln: failed to create symbolic
`pkiuser/run': No such file or directory Jun 09 21:43:11 server pkicontrol[1816]: ERROR: Failed to create 'pkiuser/run' -> '/var/run/pki/tps'! Jun 09 21:43:11 server pkicontrol[1816]: WARNING: Symbolic link 'pkiuser/conf' does NOT exist! Jun 09 21:43:11 server pkicontrol[1816]: INFO: Attempting to create 'pkiuser/conf' -> '/etc/pki-tps' . . . Jun 09 21:43:11 server pkicontrol[1816]: ln: failed to create symbolic
----- Original Message ----- link link link
`pkiuser/conf': No such file or directory Jun 09 21:43:11 server pkicontrol[1816]: ERROR: Failed to create 'pkiuser/conf' -> '/etc/pki-tps'!
On Wed, Jun 5, 2013 at 1:20 PM, Andrew Wnuk < awnuk@redhat.com > wrote:
On 06/04/2013 02:57 PM, Andrew Wnuk wrote:
On 06/03/2013 07:10 AM, Ade Lee wrote:
Can you attach the logs under /var/log/pki-tps ? Also, check /var/log/messages to see if there are any messages there.
Another thing you can try is to set selinux in permissive mode, and see if the server starts.
Ade You could also try to disable syntax checking in your directory server.
https://access.redhat.com/site/documentation/en-US/Red_Hat_Directory_Server/...
On Fri, 2013-05-31 at 17:46 -0400, Brian Henson wrote:
This is the only error i see in the TPS install log [2013-05-29 03:37:20] [error] FAILED run_command("/bin/systemctl restart pki-tpsd@pki-tps.service "), exit status=1 output="Job failed. See system journal and 'systemctl status' for details." and the same error(minus service name on the other service)
I don't mean to sound dumb but where is the logfiles? I am using the wiki install page as a guide. Installation logs are under /var/log with names referring to subsystems like: pki-ca-install.log, pki-kra-install.log,
On Fri, May 31, 2013 at 5:14 PM, Andrew Wnuk < awnuk@redhat.com > wrote: On 05/31/2013 07:53 AM, Brian Henson wrote: pki-tks-install.log, pki-tks-install.log, . . . Each subsystem has its logs located under subsystem directory. For example * CA logs by default are located in /var/log/pki-ca * TPS logs by default are located in /var/log/pki-tps * . . .
On Thu, May 30, 2013 at 4:01 PM, Andrew Wnuk < awnuk@redhat.com > wrote:
Is there anything in the log files pointing to your failure? If yes, could you provide these log entries?
On 05/30/2013 11:34 AM, Brian Henson wrote:
Any Ideas on this? I need the TPS for the smartcard support.
On Wed, May 29, 2013 at 1:24 PM, Brian Henson < marine64@gmail.com > wrote: Fedora 17 and dogtag 9 via yum
On May 29, 2013 12:01 PM, "Andrew Wnuk" < awnuk@redhat.com > wrote:
On 05/28/2013 09:46 PM, Brian Henson wrote:
Hello all,
When I try to configure the RA subsystem after installing it I get this error.
Installation information recorded in /var/log/pki-ra-install.log. [debug] run_command(/bin/systemctl restart pki-rad@pki-ra.service ) [error] FAILED run_command("/bin/systemctl restart pki-rad@pki-ra.service "), exit status=1 output="Job failed. See system journal and 'systemctl status' for details." Before proceeding with the configuration, make sure the firewall settings of this machine permit proper access to this subsystem.
Please start the configuration by accessing:
https://
(someaddress):12890/ra/admin/console/config/login?pin=XWdsV1oDtx9qQFcybzAr
After configuration, the server can be operated by the command:
/bin/systemctl restart pki-rad@pki-ra.service
Anyone know how to fix this? I get it for the TPS module as well.
Thanks
Brian Henson
Brian,
Could you provide OS and server versions?
Thank you, Andrew
_______________________________________________ Pki-users mailing list Pki-users@redhat.com https://www.redhat.com/mailman/listinfo/pki-users
_______________________________________________ Pki-users mailing list Pki-users@redhat.com https://www.redhat.com/mailman/listinfo/pki-users
_______________________________________________ Pki-users mailing list Pki-users@redhat.com https://www.redhat.com/mailman/listinfo/pki-users