Only error I am working with now is my test smart card (expresso pro 64k -fips) shows error 28 when I try to format it using the smart card manager. Anyone know how to fix that? On Mon, Jun 10, 2013 at 9:55 PM, Brian Henson <marine64@gmail.com> wrote:
Perfect. Changed the two files and it installed perfectly. Thank you for your help.
On Mon, Jun 10, 2013 at 8:39 PM, Andrew Wnuk <awnuk@redhat.com> wrote:
On 06/10/2013 12:56 PM, Brian Henson wrote:
I have SELinux completely disabled. SHould I skip the semanage part?
Yes, check the earlier comments.
On Mon, Jun 10, 2013 at 12:26 PM, Andrew Wnuk <awnuk@redhat.com> wrote:
Hi Brian,
it looks like you may have similar issue to https://bugzilla.redhat.com/show_bug.cgi?id=971031 Could you try solution provided in 971031?
Thank you, Andrew
On 06/09/2013 06:48 PM, Brian Henson wrote:
Log file
On Sun, Jun 9, 2013 at 9:47 PM, Brian Henson <marine64@gmail.com> wrote:
Changed the syntax checking now i get this when starting
Jun 09 21:43:11 server pkicontrol[1816]: ln: failed to create symbolic link `pkiuser/logs': No such file or directory Jun 09 21:43:11 server pkicontrol[1816]: ERROR: Failed to create 'pkiuser/logs' -> '/var/log/pki-tps'! Jun 09 21:43:11 server pkicontrol[1816]: WARNING: Symbolic link 'pkiuser/run' does NOT exist! Jun 09 21:43:11 server pkicontrol[1816]: INFO: Attempting to create 'pkiuser/run' -> '/var/run/pki/tps' . . . Jun 09 21:43:11 server pkicontrol[1816]: ln: failed to create symbolic link `pkiuser/run': No such file or directory Jun 09 21:43:11 server pkicontrol[1816]: ERROR: Failed to create 'pkiuser/run' -> '/var/run/pki/tps'! Jun 09 21:43:11 server pkicontrol[1816]: WARNING: Symbolic link 'pkiuser/conf' does NOT exist! Jun 09 21:43:11 server pkicontrol[1816]: INFO: Attempting to create 'pkiuser/conf' -> '/etc/pki-tps' . . . Jun 09 21:43:11 server pkicontrol[1816]: ln: failed to create symbolic link `pkiuser/conf': No such file or directory Jun 09 21:43:11 server pkicontrol[1816]: ERROR: Failed to create 'pkiuser/conf' -> '/etc/pki-tps'!
On Wed, Jun 5, 2013 at 1:20 PM, Andrew Wnuk <awnuk@redhat.com> wrote:
On 06/04/2013 02:57 PM, Andrew Wnuk wrote:
On 06/03/2013 07:10 AM, Ade Lee wrote:
> Can you attach the logs under /var/log/pki-tps ? > Also, check /var/log/messages to see if there are any messages there. > > Another thing you can try is to set selinux in permissive mode, and > see > if the server starts. > > Ade > You could also try to disable syntax checking in your directory server.
https://access.redhat.com/site/documentation/en-US/Red_Hat_Directory_Server/...
> On Fri, 2013-05-31 at 17:46 -0400, Brian Henson wrote: > >> This is the only error i see in the TPS install log [2013-05-29 >> 03:37:20] [error] FAILED run_command("/bin/systemctl restart >> pki-tpsd@pki-tps.service"), exit status=1 output="Job failed. See >> system journal and 'systemctl status' for details." and the same >> error(minus service name on the other service) >> >> >> On Fri, May 31, 2013 at 5:14 PM, Andrew Wnuk <awnuk@redhat.com> >> wrote: >> On 05/31/2013 07:53 AM, Brian Henson wrote: >> > I don't mean to sound dumb but where is the >> logfiles? I am >> > using the wiki install page as a guide. >> Installation logs are under /var/log >> with names referring to >> subsystems like: pki-ca-install.log, pki-kra-install.log, >> pki-tks-install.log, pki-tks-install.log, . . . >> Each subsystem has its logs located under >> subsystem directory. >> For example >> * CA logs by default are located in /var/log/pki-ca >> * TPS logs by default are located in >> /var/log/pki-tps >> * . . . >> > >> > >> > On Thu, May 30, 2013 at 4:01 PM, Andrew Wnuk >> > <awnuk@redhat.com> wrote: >> > >> > Is there anything in the log files pointing to >> your >> > failure? >> > If yes, could you provide these log entries? >> > >> > On 05/30/2013 11:34 AM, Brian Henson wrote: >> > >> > > Any Ideas on this? I need the TPS for the >> > > smartcard support. >> > > >> > > >> > > On Wed, May 29, 2013 at 1:24 PM, Brian Henson >> > > <marine64@gmail.com> wrote: >> > > Fedora 17 and dogtag 9 via yum >> > > >> > > On May 29, 2013 12:01 PM, "Andrew Wnuk" >> > > <awnuk@redhat.com> wrote: >> > > >> > > On 05/28/2013 09:46 PM, Brian >> > > Henson wrote: >> > > >> > > > Hello all, >> > > > >> > > > >> > > > When I try to configure the >> RA >> > > > subsystem after installing >> it I >> > > > get this error. >> > > > >> > > > >> > > > Installation information >> > > > recorded >> > > > in >> /var/log/pki-ra-install.log. >> > > > [debug] >> > > > run_command(/bin/systemctl >> > > > restart >> pki-rad@pki-ra.service) >> > > > [error] FAILED >> > > > run_command("/bin/systemctl >> > > > restart >> > > > pki-rad@pki-ra.service"), >> exit >> > > > status=1 output="Job failed. >> See >> > > > system journal and 'systemctl >> > > > status' for details." >> > > > Before proceeding with the >> > > > configuration, make sure >> > > > the firewall settings of this >> > > > machine permit proper >> > > > access to this subsystem. >> > > > >> > > > >> > > > Please start the >> configuration >> > > > by accessing: >> > > > >> > > > >> > > > >> https://(someaddress):12890/ra/admin/console/config/login?pin=XWdsV1oDtx9qQF... >> > > > >> > > > >> > > > After configuration, the >> server >> > > > can be operated by the >> command: >> > > > >> > > > >> > > > /bin/systemctl restart >> > > > pki-rad@pki-ra.service >> > > > >> > > > >> > > > >> > > > >> > > > Anyone know how to fix this? >> I >> > > > get it for the TPS module as >> > > > well. >> > > > >> > > > >> > > > Thanks >> > > > >> > > > >> > > > Brian Henson >> > > > >> > > > >> > > >> > > Brian, >> > > >> > > Could you provide OS and server >> > > versions? >> > > >> > > Thank you, >> > > Andrew >> > > >> > > >> > > >> > >> > >> > >> > >> >> >> _______________________________________________ >> Pki-users mailing list >> Pki-users@redhat.com >> https://www.redhat.com/mailman/listinfo/pki-users >> > > _______________________________________________ Pki-users mailing list Pki-users@redhat.com https://www.redhat.com/mailman/listinfo/pki-users