Problems with Luna PCI HSM and dogtag 1.3
Dear pki-users. We are setting up a CA subsystem using dogtag 1.3 on CentOS-5.8 and a HSM Luna PCI3000 (SafeNet). The HSM card seems to be correctly installed in the system and, using the command line utilities, we could create a partition on the HSM to store the crypto data. Unfortunately, when I run pkicreate and then the configuration wizard in order to configure the CA subsystem, the HSM modules seems not to be detected and the system still uses the software "NSS Internal PKCS #11 Module". I also tried to manually load the pkcs#11 module using the command: # modutil -dbdir /var/lib/igi-ca/alias -nocertdb -add lunapci -libfile /usr/lunapci/lib/libCryptoki2_64.so and the output of the list command is the following: # modutil -dbdir /var/lib/igi-ca/alias -list Listing of PKCS #11 Modules ----------------------------------------------------------- 1. NSS Internal PKCS #11 Module slots: 2 slots attached status: loaded slot: NSS Internal Cryptographic Services token: NSS Generic Crypto Services slot: NSS User Private Key and Certificate Services token: NSS Certificate DB 2. lunapci library name: /usr/lunapci/lib/libCryptoki2_64.so slots: 1 slot attached status: loaded slot: Viper PCI Card token: turintest ----------------------------------------------------------- Moreover this is the output of TokenInfo command: # TokenInfo /var/lib/igi-ca/alias/ Database Path: /var/lib/igi-ca/alias/ Found external module 'NSS Internal PKCS #11 Module' Found external module 'lunapci' Found external token 'turintest' Despite all of that, when the configuration wizard comes to the "Key Store" page the module is not listed. I then tried to include it manually in the CS.cfg file: preop.configModules.module0.commonName=lunapci preop.configModules.module0.imagePath=../img/clearpixel.gif preop.configModules.module0.userFriendlyName=lunapci and in this case it is listed but in Status "Not Found" How can I solve this issue? Do you have some suggestions? Thank you very much R. Brunetti
I have not worked on a Luna PCI HSM, but did you try the following to see if it provides you with any clue on the status of the token? modutil -dbdir /var/lib/igi-ca/alias -list lunapci And another suggestion is to add the token/password in the password.conf file before you start the configuration. Christina On 05/24/2012 05:34 AM, Riccardo Brunetti wrote:
Dear pki-users. We are setting up a CA subsystem using dogtag 1.3 on CentOS-5.8 and a HSM Luna PCI3000 (SafeNet). The HSM card seems to be correctly installed in the system and, using the command line utilities, we could create a partition on the HSM to store the crypto data.
Unfortunately, when I run pkicreate and then the configuration wizard in order to configure the CA subsystem, the HSM modules seems not to be detected and the system still uses the software "NSS Internal PKCS #11 Module".
I also tried to manually load the pkcs#11 module using the command:
# modutil -dbdir /var/lib/igi-ca/alias -nocertdb -add lunapci -libfile /usr/lunapci/lib/libCryptoki2_64.so
and the output of the list command is the following:
# modutil -dbdir /var/lib/igi-ca/alias -list
Listing of PKCS #11 Modules ----------------------------------------------------------- 1. NSS Internal PKCS #11 Module slots: 2 slots attached status: loaded
slot: NSS Internal Cryptographic Services token: NSS Generic Crypto Services
slot: NSS User Private Key and Certificate Services token: NSS Certificate DB
2. lunapci library name: /usr/lunapci/lib/libCryptoki2_64.so slots: 1 slot attached status: loaded
slot: Viper PCI Card token: turintest -----------------------------------------------------------
Moreover this is the output of TokenInfo command:
# TokenInfo /var/lib/igi-ca/alias/
Database Path: /var/lib/igi-ca/alias/ Found external module 'NSS Internal PKCS #11 Module' Found external module 'lunapci' Found external token 'turintest'
Despite all of that, when the configuration wizard comes to the "Key Store" page the module is not listed. I then tried to include it manually in the CS.cfg file:
preop.configModules.module0.commonName=lunapci preop.configModules.module0.imagePath=../img/clearpixel.gif preop.configModules.module0.userFriendlyName=lunapci
and in this case it is listed but in Status "Not Found"
How can I solve this issue? Do you have some suggestions?
Thank you very much R. Brunetti
_______________________________________________ Pki-users mailing list Pki-users@redhat.com https://www.redhat.com/mailman/listinfo/pki-users
I have not worked on a Luna PCI HSM, but did you try the following to see if it provides you with any clue on the status of the token? modutil -dbdir /var/lib/igi-ca/alias -list lunapci
And another suggestion is to add the token/password in the password.conf file before you start the configuration.
Christina
On 05/24/2012 05:34 AM, Riccardo Brunetti wrote:
Dear pki-users. We are setting up a CA subsystem using dogtag 1.3 on CentOS-5.8 and a HSM Luna PCI3000 (SafeNet). The HSM card seems to be correctly installed in the system and, using the command line utilities, we could create a partition on the HSM to store the crypto data.
Unfortunately, when I run pkicreate and then the configuration wizard in order to configure the CA subsystem, the HSM modules seems not to be detected and the system still uses the software "NSS Internal PKCS #11 Module".
I also tried to manually load the pkcs#11 module using the command:
# modutil -dbdir /var/lib/igi-ca/alias -nocertdb -add lunapci -libfile /usr/lunapci/lib/libCryptoki2_64.so
and the output of the list command is the following:
# modutil -dbdir /var/lib/igi-ca/alias -list
Listing of PKCS #11 Modules ----------------------------------------------------------- 1. NSS Internal PKCS #11 Module slots: 2 slots attached status: loaded
slot: NSS Internal Cryptographic Services token: NSS Generic Crypto Services
slot: NSS User Private Key and Certificate Services token: NSS Certificate DB
2. lunapci library name: /usr/lunapci/lib/libCryptoki2_64.so slots: 1 slot attached status: loaded
slot: Viper PCI Card token: turintest -----------------------------------------------------------
Moreover this is the output of TokenInfo command:
# TokenInfo /var/lib/igi-ca/alias/
Database Path: /var/lib/igi-ca/alias/ Found external module 'NSS Internal PKCS #11 Module' Found external module 'lunapci' Found external token 'turintest'
Despite all of that, when the configuration wizard comes to the "Key Store" page the module is not listed. I then tried to include it manually in the CS.cfg file:
preop.configModules.module0.commonName=lunapci preop.configModules.module0.imagePath=../img/clearpixel.gif preop.configModules.module0.userFriendlyName=lunapci
and in this case it is listed but in Status "Not Found"
How can I solve this issue? Do you have some suggestions?
Thank you very much R. Brunetti
_______________________________________________ Pki-users mailing list Pki-users@redhat.com https://www.redhat.com/mailman/listinfo/pki-users
_______________________________________________ Pki-users mailing list Pki-users@redhat.com https://www.redhat.com/mailman/listinfo/pki-users Dear Christina. Thank you very much for your suggestions. It was actually a problem with
Il 24/05/12 21 23:49, Christina Fu ha scritto: the HSM activating password. Now dogtag sees the module and uses it. Thanks a lot once again. Best Regards R. Brunetti -- ------------------- Riccardo Brunetti INFN - Torino Tel: +390116707295 Skype: rbrunetti -------------------
participants (3)
-
Christina Fu -
Riccardo Brunetti -
Torino