I am using 389 server for my Directory server. I will attache the longs when i get home tonight
On Tue, Jun 4, 2013 at 5:57 PM, Andrew Wnuk <awnuk@redhat.com> wrote:
On 06/03/2013 07:10 AM, Ade Lee wrote:You could also try to disable syntax checking in your directory server.
Can you attach the logs under /var/log/pki-tps ?
Also, check /var/log/messages to see if there are any messages there.
Another thing you can try is to set selinux in permissive mode, and see
if the server starts.
Ade
On Fri, 2013-05-31 at 17:46 -0400, Brian Henson wrote:
This is the only error i see in the TPS install log [2013-05-29
03:37:20] [error] FAILED run_command("/bin/systemctl restart
pki-tpsd@pki-tps.service"), exit status=1 output="Job failed. See
system journal and 'systemctl status' for details." and the same
error(minus service name on the other service)
On Fri, May 31, 2013 at 5:14 PM, Andrew Wnuk <awnuk@redhat.com> wrote:
On 05/31/2013 07:53 AM, Brian Henson wrote:
> I don't mean to sound dumb but where is the logfiles? I am
> using the wiki install page as a guide.
Installation logs are under /var/log with names referring to
subsystems like: pki-ca-install.log, pki-kra-install.log,
pki-tks-install.log, pki-tks-install.log, . . .
Each subsystem has its logs located under subsystem directory.
For example
* CA logs by default are located in /var/log/pki-ca
* TPS logs by default are located in /var/log/pki-tps
* . . .
>
>
> On Thu, May 30, 2013 at 4:01 PM, Andrew Wnuk
> <awnuk@redhat.com> wrote:
>
> Is there anything in the log files pointing to your
> failure?
> If yes, could you provide these log entries?
>
> On 05/30/2013 11:34 AM, Brian Henson wrote:
>
> > Any Ideas on this? I need the TPS for the
> > smartcard support.
> >
> >
> > On Wed, May 29, 2013 at 1:24 PM, Brian Henson
> > <marine64@gmail.com> wrote:
> > Fedora 17 and dogtag 9 via yum
> >
> > On May 29, 2013 12:01 PM, "Andrew Wnuk"
> > <awnuk@redhat.com> wrote:
> >
> > On 05/28/2013 09:46 PM, Brian
> > Henson wrote:
> >
> > > Hello all,
> > >
> > >
> > > When I try to configure the RA
> > > subsystem after installing it I
> > > get this error.
> > >
> > >
> > > Installation information
> > > recorded
> > > in /var/log/pki-ra-install.log.
> > > [debug]
> > > run_command(/bin/systemctl
> > > restart pki-rad@pki-ra.service)
> > > [error] FAILED
> > > run_command("/bin/systemctl
> > > restart
> > > pki-rad@pki-ra.service"), exit
> > > status=1 output="Job failed. See
> > > system journal and 'systemctl
> > > status' for details."
> > > Before proceeding with the
> > > configuration, make sure
> > > the firewall settings of this
> > > machine permit proper
> > > access to this subsystem.
> > >
> > >
> > > Please start the configuration
> > > by accessing:
> > >
> > >
> > > https://(someaddress):12890/ra/admin/console/config/login?pin=XWdsV1oDtx9qQFcybzAr
> > >
> > >
> > > After configuration, the server
> > > can be operated by the command:
> > >
> > >
> > > /bin/systemctl restart
> > > pki-rad@pki-ra.service
> > >
> > >
> > >
> > >
> > > Anyone know how to fix this? I
> > > get it for the TPS module as
> > > well.
> > >
> > >
> > > Thanks
> > >
> > >
> > > Brian Henson
> > >
> > >
> >
> > Brian,
> >
> > Could you provide OS and server
> > versions?
> >
> > Thank you,
> > Andrew
> >
> >
> >
>
>
>
>
_______________________________________________
Pki-users mailing list
Pki-users@redhat.com
https://www.redhat.com/mailman/listinfo/pki-users